Bowers-group M&W Digitronic Indicator 405 Series Bedienungsanleitung PDF herunterladen

For more information visit www.moore-and-wright.com Partners in Precision

DIGITRONIC INDICATOR INSTRUCTIONS

Digitronic Indicator 405 Series

Please carefully review these instructions to ensure proper and accurate use of your Digitronic Indicator.

Features

1. ON/OFF

2. Floating ZERO

3. Absolute/Incremental readings

4. Direct mm-in conversion

5. Tolerance indicators

6. Battery cover

Operation

• To turn the indicator on or off press ON/OFF (1) momentarily

• To ZERO the indicator at any location press ZERO (2). This can be used in either ABS or INC

• Press mm/in (4) to display readings in either inch or metric

• Press ABS (3) to toggle between Absolute and Incremental reading. ZERO may be set at any location in either mode

• Tolerance indicators may be activated by pressing TOL (5) one time. "s" will appear in the display. Displace the spindle so the maximum

allowed reading is displayed and press TOL (5) once more. "t" will appear in the display. Displace the spindle so the minimum allowed

reading is displayed and press TOL (5) once more. "OK" will be shown in the display while your readings are between the two allowed

readings. Once either of these settings has been exceeded "OK" will flash indicating an out of tolerance measurement. To exit TOL (5) mode

depress ZERO (2). To reset tolerances depress TOL (5) and input the max and min readings

Maintenance

• Avoid contact with liquids and excessive humidity.

• If the instrument requires cleaning, use only isopropyl alcohol and

a soft cloth.

• Battery is low when the display flashes. To replace the battery, use

a small screwdriver to open the side battery compartment (6). Use 1

CR2032 battery.

Specifications

Measuring range: 0-1"/0-25mm

0-.5"/0-12.5mm

Resolution: 0.0005"/0.01mm

Accuracy: 0.001"/0.03mm

Repeatability: 0.0005"/0.01mm

Display: LCD (11.0 mm high)

Maximum measuring speed: 1.5m per second

Battery: 3V, type CR2032 Lithium

Battery life: Approx. 1 year

MW405-4DB_Manual_A4.indd 1 08/05/2012 09:35

Inhaltsverzeichnis

Seite 1

For more information visit www.moore-and-wright.com Partners in PrecisionDIGITRONIC INDICATOR INSTRUCTIONSDigitronic Indicator 405 SeriesPlease care

Kommentare zu diesen Handbüchern

Keine Kommentare

Bowers-group M&W Digitronic Indicator 405 Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Messgeräte Bowers-group M&W Digitronic Indicator 405 Series herunter. Bowers Group M&W Digitronic Indicator 405 Series User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Bowers-group M&W Digitronic Indicator 405 Series